| CAS No.: | 7085-85-0 |
|---|---|
| Formula: | Mixture |
| EINECS: | 230-391-5 |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
TM507 MS Polymer Wood Flooring Adhesive is an eco-friendly woodflooring adhesive formulated with advanced MS Polymer technology,permanently elastic,that can be used in the installation of a wooden floor to a sub floor.
1. Ready for use, no mixing required, can be troweled easily
2. For all types of woof flooring
3. Solvent and water-free
4. Waterproof& flexibl
5. MS floor adhesive has strong adhesion, durable elasticity, curing does not shrink does not bubble, shock resistance aging resistance, temperature and humidity resistance.
6. Environmental indicators are very high, no irritating odor, non-toxic no solvent no cyanate, no corrosion and pollution-free, VOC release is very small.
7. Single component, hygroscopic curing, easy construction.
Ideal for bonding wood floors to concrete, plywood, cured leveling compounds, moisture vapour barrier, particle board, rubber underlay, gypsum board, ceramic tiles, stone, terrazzo, radiant heated sub floors, metal decking, steel, and aluminium.
(1) The glue coated floor to do cement self-leveling treatment, must be clean, dry, smooth, cement floor can not sand.
(2) Before applying, it is necessary to always check the humidity of the floor and wood with special tools.
(3) On the floor, use a roller or brush to apply PU primer, and leave to dry for 1 hour.
(4) Use a standard serrated scraper (B2/B3) to evenly scrape the wood floor glue on the ground, and install the floor in the vertical direction after 3 to 5 minutes of scraping glue, and directly level the floor. It can not be installed after the glue is cured.
(5) After the installation of the floor is completed, the glue begins to cure from the second day, the third day is completely cured, and the bonding strength of the glue reaches the maximum after seven days, and has been maintained.
| Appearance | Paste |
| Density | 1.4±0.1g/cm³ |
| Skin Time | 40~120min |
| Viscosity,Pa.S | 800~2000 |
| Shear tensile rate | ≥200% |
| Shear strength Mpa | ≥0.6MPa |
| Heat aging peel strength(60ºC) | ≥0.5MPa |
| Tensile strength Mpa | ≥1.2Pa |
| Hardness Shore A | 30~40 |
| VOCS | ≤15g/L |
| Coating property | Easy to coat |
Q1: How can you guarantee the quality?
A1: Our QC staff will inspect the raw material,during the process of before-filling, after-filling and before-delivery we will inspect the sealant .
Q2:Can I get a sample?
A2:Yes,we provide.We will keep the sample for around 12 months to in case if there is any problem, so that we can trace it.
Q3: Can you provide OEM service?
A3:Of course,we have printing and we produce cartridges and sausages ourselves.
Q4:How to solve the quality problem after sales?
A4: Take the photos or videos of the problem to us. After confirming the problem, we will make a satisfied solution to you.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}